The Jazzy® ES-Portable offers a combination of great style, comfort, performance and portability and disassembles into 5 convenient pieces for your active lifestyle.
The in-line, front-wheel drive design allows tight turns around corners, with large front wheels for extra absorption over obstacles.
With superb climbing capabilities and front anti-tip wheels, the Jazzy Elite ES Portable transitions over grade changes smoothly and handles various terrains with ease.
- Easy disassembly for convenient transport
- In-line, front-wheel drive technology
- 40 amp, PG GC 3 controller
- Simple main frame design for easy serviceability
|Weight Capacity||300 lbs.|
|Maximum Speed3||Up to 4 mph|
|Front Wheels||3" solid anti-tips|
|Drive Wheels||9" solid|
|Rear Wheels||6" solid casters|
|Drivetrain||Two-motor, in-line, front-wheel drive|
|Braking System||Regenerative and electro-mechanical|
|High-Back Seat (max. size)||20"W x 20"D|
|High-Back Seat-to-Floor Range||21.5" - 23.5"|
|Standard Electronics||40A, PG GC3|
|Battery Size (2 required)||12 volt, U-1|
|Standard Battery Charger||3.5A, off-board|
|Per-Charge Range3,6||Up to 11 miles|
|Battery Weight5||25 lbs. each|
|Weight of Heaviest Piece4||48 lbs.|
|Standard Seat Weight||43 lbs. (comfort, high-back)|
|Standard Seat Size||18"x18"-20"|
|Medicare Code Coverage||Group 2: Standard, Portable (K0820/K0821)|
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 Does not include seat or battery weights.
5 Battery weight may vary based on manufacturer.
6 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.